The UltraDish TP Antennas are designed for CPE or PtP connections. The antenna reflector is made of die-cast aluminium to ensure a very uniform shape and the RF elements’ virtually lossless TwistPort connector guarantees easy radio deployment and maintenance.

Not only is the antenna durable and easy to connect your radio to, but UltraDish Antennas themselves are extremely easy to install which ensures rapid deployment for large scale projects. Their innovative antenna mount fits a wide range of pole diameters and can be easily swapped for right or left side mounts – all you need is a single HEX tool to perform your installation.

Recap of the benefits:

High Gain Directional Antennas

UltraDish TP Antennas are high-gain directional parabolic antennas with a lossless TwistPort connector. Antennas are highly directional and have suppressed side lobes for ultimate performance.

TwistPort Connector

TwistPort is a quick-locking, virtually lossless, waveguide port that connects radios and antennas. TwistPort is our original design, and sets new standards for outdoor wireless equipment in terms of performance, scalability, ease of use, and deployment simplicity.

Virtually Lossless

TwistPort connectors are virtually lossless: there are no coaxial RF connectors or RF cables that cause a significant signal loss. In comparison to widely used coaxial cables and connectors, the loss on TwistPort is almost unmeasurable. Suppressed side lobe radiation reduces interferences and enables installation in areas with increased noise.

The New Definition of Easy

TwistPort is the new definition of “easy”. By integrating the mechanical and the RF connection into the same structure, the connection of the radio to the antenna is brilliantly simple – “twist and lock” – and can be done with one hand!

Performance

Suppressed sidelobe radiation reduces interferences and enables installation in areas with high noise levels. The gain of UltraDish TP antennas is achieved by focusing the signal delivered via the TwistPort waveguide connector. UltraDish TP 380 provides 24dBi gain and 8° (-3dB) beamwidth.

Innovative Mounting System

UltraDish TP features a new innovative mounting system. The mount is separated from the antenna, and therefore the antenna installation and adjustment are easy and quick.

• Step 1: Bracket Installation

First install the bracket on the pole. Two sets of pole screws for different pole diameters are included. The pole bracket is reversible: it can be mounted on the left or the right side of the antenna.

• Step 2: Antenna Adjustment

Simply slide the antenna in the bracket and you are ready for independent adjustment of elevation and azimuth. Tighten the screws and the installation is done. Only one tool is needed for the installation!

Cross-Platform Compatibility

UltraDish TP antennas can be used with any radio with a TwistPort interface or with a variety of third-party radios connected through a TwistPort Adaptor.